3 Axis Sandwich Panel Cutting Machine 5 Axis CNC Cutting Machine for Processing of Car Interiors, RV Insulation Panel, and Van-Type Truck Insulation Panel

Product Description

3 axis sandwich panel cutting machine 5 axis CNC cutting machine for processing of car interiors, RV insulation panel, and van-type truck insulation panel.

HSR-DR1370AC adopt Imported automatic tool change high power mechincal spindle+ five-axis mechanical saws,horizontal 360 degree arbitrary rotation angle,which make this machine can working on the panel materials front plate, side, around, slope to do cutting and tapping, milling,drilling and other technology.
Applications industry and material:
1.Industry: It applies to large panel production and processing, such as kinds of wood fiberglass,FRP composition sheet,aluminum,hard plastic,acrylic, insulation materials and other large sheet, which are required on refrigerated compartments, insulation compartments,processing sun room,log cabin,RVfield barracks, quick housing etc
2.Material: large panel plate is a laminate or sandwich structure, inside and outside the skin for the aluminum or glass steel plate,the internal buried plate can be 6mm stainless steel plate carbon steel plate,the filler can be polyurethane foam, EPS foam or XPS foam glass or aluminum outer surface is usually attached A layer of protective film.

 

Detailed Photos

Equipment spindle: the original imported Taiwan Dan Quan servo mechanical spindle, with automatic tool change kinetic energy, spindle speed (0-12000) rpm / min, BT40 fixture standard, the largest clamping knife diameter φ32mm, with a large torque output, radial run out small And other advantages, suitable for lined with aluminum, stainless steel composite sandwich board fast cutting processing, equipped with tool magazine, capacity 8, can be achieved in the program automatically tool change function, high automation performance. For the plate of the straight line, curve cutting, drilling and other processing, and support tapping Function Maximum tool weight 5KG Maximum tool length 150mm Used for straight line and curve cutting, punching and other processing of plates, and supports tapping function.

Equipped with a rotatable operating table, ergonomic design, can achieve double-section 270 ° rotation. Taiwan SYNTEC new generation industrial CNC control system, with a handheld tool setting unit (CNC system resolution: ± 0.001mm) has the advantages of anti-interference, anti-static, and high temperature resistance. The control system operating table and electrical cabinet are installed on
the gantry and move forward and backward with the gantry, avoiding signal attenuation caused by long cables and affecting the stability of the machine. During processing, the required tool can be automatically selected and automatically adjusted to the appropriate processing parameters according to the selected tool. The system
software is compatible with CATIA, SOLIWORKS, AutoCad 2007, Mastercam 9.0 and above. Visual operating system, keyboard and mouse control, with breakpoint return cutting, cutting path preview, automatic error diagnosis and other functions. The equipment can memorize the current coordinates in the emergency stop, break point, and power-off state, and return to continue to complete the remaining setting tasks.

 

Product Parameters

Machine model	HSR-DR1370AC  3 axis sandwich panel cutting machine 5 axis CNC cutting machine for processing of car interiors, RV insulation panel, and van-type truck insulation panel.
Working area	X*Y*Z	1300*7000*350
	Saw axis	4 axis saw;
Effective working area	X*Y*Z	1300*7000*350mm
Machine structure	Whole steel structure, segmented composite table, double bridge girder gantry structure, aging treatment
Table structure	Vacuum worktable	Vacuum negative pressure adsorption, multiple water cooling vacuum pump
	Auxiliary organization	T-slot, pneumatic positioning device, move the suction cup
Control system	Brand model	Taiwan Syntec control system
	Control cabinet	Independent control cabinet with forced cooling switch system
Spindle	Spindle brand	Taiwan mechanical water cooling spindle
	power/ speed	Spindle power 5.5KW, speed 0-10000rpm/min
	Tool holder	BT40 standard, hydraulic lock
	Tool magazine	Rotating-disk tool magazine, with 8 tools
Saw blade motor	Brand	Italy Simic
	Motor/speed	Saw blade 7.5KW,speed 2800rpm/min
Servo motor system	Brand	Japan YASKAWA servo motor and driver system
Reducer	X,Y,Z	Planetary reducer
	A,C	Original imported precision reducer
Transmission	Imported square linear guide rail,XY precision rack gear drive,Z axis imported ball screw transmission
Feed speed	X axis≥35000mm/min   Y axis≥35000mm/min   Z axis≥9000mm/min
Position accuracy	±0.1mm
Re-position accuracy	±0.05mm
Total machine weight	About 12 tons
Working speed	Spindle cut speed:(0~8)m/min;saw blade cut speed:(0~5)m/min
	Spindle drilling hole:drilling hole(0~8)m/min,the next hole(0~25)m/min
Power/voltage/air pressure	Whole power 50KW  voltage AC 380V/50HZ  air pressure≥6.5Kgf/cm²

Sample showing 

 

Certifications

Packaging & Shipping

Our Advantages

Built in 1996,factory&head office are located in Qingdao, Shandong, China.
Owing 2000m2 factory and over 200 workers, and total assets nearly 100million yuan.
All products are manufactured by ourselves, all machines are approved by ISO9001: 2008 and CE. We own self-managed Import and Export rights, Exporting to more than 50 countries, such as Germany, USA, Canada, South Korea, Russia, India, Egypt, Brazil, Uzbekistan, Vietnam, Southeast Asia, ect,.
20 years, enough experience of CNC Manufacturing. Enough experience of abroad after-sale service.
Winning by High quality with good price, in order to make sure every details high quality level, most of the machines metal parts are made by our own. Machining Center imported from American. About 100 odd machinery Equipment including CNC machining center, large-scale digital display boring machine, double 
housing planer, etc. With strong manufacturing capacity.
150mm thickness acrylic panle cutting machine router with 12 kw High Torque Electric  ATC spindle 

After Sales Service

Q:What's type machines will be produced?
A: Our main machine types as the following:
5 Axis CNC Machining Centers, Composite Panel Processing CNC Router , Mould machining center, and other various high-end customized CNC Equipment.

Q:What's the machine production days ?
A:Arrange from 20-120 days,depends on the different machine types and the machine details configurations

Q:What about the after selling service?
A:We will offer you technical support and service all the lifetime;
7*24 hours online consultation;
Rapidly response and give solutions within 2-8 hours;
If buyer needs Installation and training, the buyer needs to afford engineer's Round trip air tickets, visas, accommodation and Salaries

Q:What is the warranty period for using the device?
A:12 months for the whole machine.
Within 12 months under normal use and maintenance, if something is wrong with the machine, we will offer you spare part for free; you just need to bear the express cost.
Out of 12 months, we will offer you spare parts at cost price.
We will offer you technical support and service all the lifetime

Q:What's your payment items?
A:30% BY T/T IN ADVANCED TO CONFIRM THE ORDER
70% BY T/T AFTER FINISHED TESTING MACHINE OR SENDING MACHINE TESTING VIDEOS AND PICTURES,BEFORE DELIVERY

If you need more infor about the machine 3 axis sandwich panel cutting machine 5 axis CNC cutting machine for processing of car interiors, RV insulation panel, and van-type truck insulation panel. Kindly send us inquirery ,we will answer you ASSP.